Dymax Rail Handlers are built to provide years of productive use and service.
Ideal for 25T-30T excavators, the Rail Handler works with standard pin grab quick coupler systems. Models can also be customized to work with proprietary coupler systems on all makes and models of large excavators.
The Dymax Rail Handler features 60 degrees of hydraulic rotation, as well as side to side tile cushioning that gives operators precise, controlled placement of rail while feeding flash butt welders. Rotation is powered through an included electro/hydraulic diverter valve kit.
Features E-Z slide telescopic arms that collapse to 19'6" (5.94 m)for transport and storage when not in use. When working the arms extend to 30' (9.14 m) for handling up to 80' (24.38 m) pieces of rail.
The Rail Handler's unique arm design works with all rail - from 115# to 141#, and features four clamps that secure the rail. All cylinders feature built in lock valves in case of pressure loss on machine.
The Dymax Rail Handler delivers rail three times faster than most common rigging and lifting operations, all while maintaining safety standards! It grabs rail from the pile without the need for workers to attach chains or lifting straps, improving efficiency and safety.
||Rail Handler - Grapple - 16 feet retracted x 27 feet extended - Hydraulic Excavator - 20 Ton
||Rail Handler - Grapple - 18 feet retracted x 30 feet extended - Hydraulic Excavator - 25 Ton
||Rail Handler - Grapple - 18 feet retracted x 30 feet extended - Hydraulic Excavator - 30 Ton
|All models feature 60° of hydraulic rotation.
|Rail Grapple Arms
||Dymax Rail Handlers require 20 to 25 gpm (75 to 94 lpm) @ 3,200 - 3,500 psi (220-240 bar) machine setting.
||Provided with Dymax 24v electro-hydraulic valve kit with wire, switch and fuse and requires installation on machine.
Specifications are subject to change without notice.