Scrap Handling Grapple Buckets for Loader Backhoes:
GRAB LARGER LOADS
Dymax Scrap Handling Grapple Buckets feature two piece, independent top clamps with solid steel tine construction. Each grapple bucket is powered by two large cylinders which firmly grip and hold awkward, hard-to-load materials. Grapple arms retract behind the leading cutting edge for loading against objects such as concrete walls or large piles of rubble.
The design of the Dymax Scrap Handling Grapple Bucket ensures that the top clamp opening is wide enough to allow conventional loading of the bucket when necessary. The flat floor enables the operator to utilize the bucket in a “skimming” mode. Grapples feature retractable stops. Crossport relief valves are used on hydraulic cylinders to protect grapples from pressure spiking.
Specifications (Backhoe Loader)
Model Code |
|||
DX-BK-GL-0.70cyd-BL-10
Bucket-Grapple-0.70 cyd capacity-Backhoe Loader-Class 10 STANDARD FEATURES: dual independent grapples, grapple control valve kit, replaceable bolt-on cutting edge, 6 inch on center hole pattern, open side design. Width: 64 inches Weight: 1580 lbs |
|||
DX-BK-GL-1.00cyd-BL-10
Bucket-Grapple-1.00 cyd capacity-Backhoe Loader-Class 10 STANDARD FEATURES: Dymax heat treated replaceable reversible bolt-on cutting edge, hydraulic cushion valve package, independent grapples, weld-on rear wear pads, open side plate design. Width: 90 inches Weight: 1650 lbs |
|||
DX-BK-GL-1.50cyd-BL-10
Bucket-Grapple-1.50 cyd capacity-Backhoe Loader-Class 10 STANDARD FEATURES: Dymax heat treated replaceable reversible bolt-on cutting edge, hydraulic cushion valve package, independent grapples, weld-on rear wear pads, open side plate design. Width range (subject to machine): 90-96 inches Weight: 2120 lbs |
|||
DX-BK-GL-1.50cyd-BL-20
Bucket-Grapple-1.50 cyd capacity-Backhoe Loader-Class 20 STANDARD FEATURES: Dymax heat treated replaceable reversible bolt-on cutting edge, hydraulic cushion valve package, independent grapples, weld-on rear wear pads, open side plate design. Width range (subject to machine): 90-96 inches Weight: 2120 lbs |
Specifications are subject to change without notice.
Specifications (Wheel Loader)
Model Code Description Weight |
|||
DX-BK-GL-1.00cyd-WL-10
Bucket-Grapple-1.00 cyd capacity-Wheel Loader-Class 10 STANDARD FEATURES: bolt-on side plates, twin independent acting grapples, can be made to work with OEM coupler systems, replaceable bolt-on cutting edge, bottom wear plates, 72 inch clamp opening (inside edge to tine tip). Width: 71 inches Weight: 1700 lbs |
|||
DX-BK-GL-1.50cyd-WL-20
Bucket-Grapple-1.50 cyd capacity-Wheel Loader-Class 20 STANDARD FEATURES: Dymax heat treated replaceable reversible bolt-on cutting edge, hydraulic cushion valve package, independent grapples, weld-on rear wear pads, open side plate design. Weight: 1750 lbs |
|||
DX-BK-GL-1.75cyd-WL-20
Bucket-Grapple-1.75 cyd capacity-Wheel Loader-Class 20 STANDARD FEATURES: bolt-on replaceable 3/4×8 cutting edge, bolt-on side plates which can be removed for handling longer materials, two independent acting grapples, (2x) 3.0 x 10.0 cylinder assemblies, 78.5 inch grapple max opening height. Width: 84 inches Weight: 1850 lbs |
|||
DX-BK-GL-1.75cyd-WL-30
Bucket-Grapple-1.75 cyd capacity-Wheel Loader Class 30 STANDARD FEATURES: Dymax heat treated replaceable reversible bolt-on cutting edge, hydraulic cushion valve package, independent grapples, weld-on rear wear pads, open side plate design. Width: 96 inches Weight: 2300 lbs |
|||
DX-BK-GL-2.00cyd-BL-20
Bucket-Grapple-2.00 cyd capacity-Backhoe Loader-Class 20 STANDARD FEATURES: Dymax heat treated replaceable reversible bolt-on cutting edge, hydraulic cushion valve package, independent grapples, weld-on rear wear pads, open side plate design. Width range (subject to machine): 92-96 inches Weight: 2500 lbs |
|||
DX-BK-GL-2.00cyd-WL-40
Bucket-Grapple-2.00 cyd capacity-Wheel Loader-Class 40 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 94-98 inches Weight: 3000 lbs |
|||
DX-BK-GL-2.50cyd-WL-40
Bucket-Grapple-2.50 cyd capacity-Wheel Loader-Class 40 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 100-102 inches Weight: 3500 lbs |
|||
DX-BK-GL-3.00cyd-WL-50
Bucket-Grapple-3.00 cyd capacity-Wheel Loader-Class 50 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine):105-108 inches Weight: 3800 lbs |
|||
DX-BK-GL-3.00cyd-WL-60
Bucket-Grapple-3.00 cyd capacity-Wheel Loader-Class 60 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, cylinder guard package, open side plate design. Width range (subject to machine): 103-106 inches Weight: 3800 lbs |
|||
DX-BK-GL-3.25cyd-WL-60
Bucket-Grapple-3.25 cyd capacity-Wheel Loader-Class 60 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 105-108 inches Weight: 4200 lbs |
|||
DX-BK-GL-3.50cyd-WL-50
Bucket-Grapple-3.50 cyd capacity-Wheel Loader-Class 50 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 105-108 inches Weight: 4400 lbs |
|||
DX-BK-GL-3.50cyd-WL-60
Bucket-Grapple-3.50 cyd capacity-Wheel Loader-Class 60 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 105-108 inches Weight: 4400 lbs |
|||
DX-BK-GL-4.00cyd-WL-60
Bucket-Grapple-4.00 cyd capacity-Wheel Loader-Class 60 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 108-115 inches Weight: 4800 lbs |
|||
DX-BK-GL-4.00cyd-WL-70
Bucket-Grapple-4.00 cyd capacity-Wheel Loader-Class 70 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 118-122 inches Weight: 5000 lbs |
|||
DX-BK-GL-4.50cyd-WL-60
Bucket-Grapple-4.50 cyd Capacity-Wheel Loader-Class 60 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 108-115 inches Weight: 5300 lbs |
|||
DX-BK-GL-4.50cyd-WL-70
Bucket-Grapple-4.50 cyd Capacity-Wheel Loader-Class 70 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 118-122 inches Weight: 5300 lbs |
|||
DX-BK-GL-5.00cyd-WL-70
Bucket-Grapple-5.00 cyd capacity-Wheel Loader-Class 70 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 118-122 inches Weight: 5600 lbs |
|||
DX-BK-GL-5.50cyd-WL-80
Bucket-Grapple-5.50 cyd capacity-Wheel Loader-Class 80 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 120-128 inches Weight: 6000 lbs |
|||
DX-BK-GL-6.00cyd-WL-80
Bucket-Grapple-6.00 cyd capacity-Wheel Loader-Class 80 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 120-128 inches Weight: 6300 lbs |
|||
DX-BK-GL-6.50cyd-WL-80
Bucket-Grapple-6.50 cyd capacity-Wheel Loader-Class 80 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 120-128 inches Weight: 6600 lbs |
|||
DX-BK-GL-7.00cyd-WL-80
Bucket-Grapple-7.00 cyd capacity-Wheel Loader-Class 80 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Width range (subject to machine): 126-130 inches Weight: 6900 lbs |
|||
DX-BK-GL-7.50cyd-WL-80
Bucket-Grapple-7.50 cyd capacity-Wheel Loader-Class 80 STANDARD FEATURES: heavy duty design, replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, closed sides like conventional GP bucket, cylinder guard package. Application: Aluminum / Scrap Yard Recommended Max Material Density: 2000 lbs / yd Width range (subject to machine): 126-130 inches Weight: 9120 lbs |
|||
DX-BK-GL-9.00cyd-WL-90
Bucket-Grapple-9.00 cyd capacity-Wheel Loader-Class 90 STANDARD FEATURES: OEM replaceable bolt-on cutting edge, hydraulic cushion valve package, independent grapple design, bottom high tensile steel wear pads, open side plate design. Weight: 13000 lbs |
Specifications are subject to change without notice.
Features
- Built for wheel loaders, track loaders, toolcarriers and telehandlers.
- Ideal for handling brush, logs, debris, refuse and in harsh applications such as moving concrete rubble.
- Standard grapple buckets feature solid style side plates. Optional open profile and bolt-on side plates are available.
- Can be equipped with a full guard package which includes cylinder, hose and fitting guards.
- Can be equipped to accept OEM bolt on cutting edges or solid rubber cutting edges for transfer station work.
- Available for a variety of machines, in a variety of capacities and widths.